| After removing gaskets and seals, always inspect contact
surface of housing or shaft for burrs resulting from removal or
for other signs of damage. |
| Before installing seals, lightly oil outer diameter and
half-fill space between sealing lips
-arrow- with sealing grease -G 052 128 A1-. |
| The open side of the oil seal faces the side with fluid
filling. |
| Only use DSG transmission oil. Other lubricants will cause
problems in function. |
| After renewing gaskets, O-rings and seals - drain gear oil
completely and refill with new oil
→ Chapter. |
|
|
|
Questions & answers
Gaskets, seals — Volkswagen Golf Mk7
What gasket rules apply to the Golf Mk7 DSG?
Always inspect contact surfaces for burrs after removing gaskets. Renew all seals — never reuse old ones.
To ensure flawless and successful gearbox repairs, the
greatest care and cleanliness as well as the use of good and
proper tools are essential. Of course, the basic r ...
Loosen and tighten securing bolts and securing nut for
covers and housings diagonally.
Specified torques settings are specified for unoiled bol ...
