 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way (mirror image of left side). |
| – |
Remove rear door trim
→ General body repairs, interior; Rep. gr.70. |
|
|
|
| – |
Using a small screwdriver, release locking devices in
direction of arrow -A-. |
| – |
Release retaining tab -2- in
direction of arrow -B-. |
| – |
Take window regulator switch -3-
out of switch mounting and remove towards rear. |
| – |
Disconnect electrical connector -1-. |
| Installation is carried out in the reverse sequence. |
|
|
|
| Removing and installing rear door contact
switches -F10-/-F11- |
Note
| The door contact switch is installed in the door lock and
cannot be renewed separately in the event of malfunction. |
| – |
Removing and installing rear door lock
→ General body repairs, exterior; Rep. gr.58. |
|
|
|
Questions & answers
Removing and installing rear window regulator switch in door -E52-/-E54- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 rear window switch?
Lever out of the rear door trim, disconnect and remove.
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Note
The electromechanical parking brake button -E538- and the
auto-hold button -E540- are combined to form one component and
cannot be separated ...
Removing and installing button for deactivating interior monitoring and
vehicle inclination sensor -E616-
Removing and installing electromechanical parking brake button
-E538-/auto-hold button -E540-