| Under certain circumstances, the display may show errors or
messages according to status. |
| The most frequent display messages are listed below,
together with suggested solutions. |
 Note
| For messages not listed here, please refer to
→ operating manual INC 940. |
|
|
|
| Display message |
Measures |
| Check connection. |
| – |
Check whether terminals of battery charger are firmly
connected to battery terminals. |
| – |
Check battery terminals are tightened according to
regulations and do not have corrosion. |
|
| Terminals connected? |
Safety function of tester.
| – |
Connect terminals to battery before starting charging
procedure. |
|
| System noise |
| – |
Switch off all electrical consumers. |
| – |
Wait until all electrical loads monitored by onboard supply
control unit have switched off. |
| – |
Disconnect any suspect non-standard electrical equipment
from the onboard supply. |
|
| Wait a few minutes and repeat charging procedure
→ Chapter. |
|
|
|
Questions & answers
Dealing with problems with Midtronics -INC 940- battery tester — Volkswagen Golf Mk7
What if the Midtronics -INC 940- gives errors?
Clean terminals, check connections, verify settings. If errors persist, try a different charger or replace the battery.
Prerequisites:
WARNING
It is not permissible to test or charge batteries
whose magic eye shows ligh ...
Solar panel VAS 6102A
General description:
Solar panel -VAS 6102A- supports onboard supply and prevents
spontaneous battery di ...
