Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing headlight washer system pump -V11-, »R«

Using a drip tray, this page covers removing the pump -V11- on "R" models — remove the reservoir first, then disconnect and turn the pump free.

Special tools and workshop equipment required Drip tray Removing –  Remove washer fluid reservoir → Chapter.

–  Disconnect connector -1- from headlight washer system pump -V11-. –  Turn headlight washer system pump -V11--2- approx. 45° in direction of arrow -A-. –  Pull headlight washer system pump -V11--2- out of washer fluid reservoir in direction of arrow -B-. –  If necessary, remove seal -3- from washer fluid reservoir. Installing Install in the reverse order of removal, observing the following: –  Check sealing grommet -3- for damage. –  Insert sealing grommet -3- in opening in washer fluid reservoir, and ensure it is seated correctly. –  Moisten sealing grommet -3- with washer fluid to ease installation of headlight washer system pump -V11-.   Note When connecting the washer fluid line, ensure that the securing clip engages audibly in the connection.

Questions & answers

Removing and installing headlight washer system pump -V11-, »R« — Volkswagen Golf Mk7

How does Golf Mk7 R headlight washer pump removal differ?

Same extraction method. Different reservoir position and hose routing on the R.

Removing and installing headlight washer system pump -V11-

Special tools and workshop equipment required Drip tray Removing –  Remove noise ins ...

Removing and installing pop-up cylinder

Special tools and workshop equipment required Drip tray Removing   Note Removal and ...

Other materials:

• Removing and installing headlight washer system pump -V11-
• Assembly overview – headlight washer system, »R«
• Removing and installing washer jets
• Removing and installing pop-up cylinder, »R«
• Removing and installing pop-up cylinder