Using removal wedge -3409-, this page covers removing the front interior/reading light — Note: the switch module is integral to -WX1- and cannot be removed separately.
| Special tools and workshop equipment
required |
|
|
|
 Note
| The switch module is an integral part of the front interior
light -WX1- and cannot be removed individually. |
|
|
|
| – |
Remove cover -1- in direction
of arrow -A-. |
|
|
|
| – |
Lever off lens of front interior light -WX1- at points
marked with -arrows- using removal
wedge -3409-. |
| Only front interior light -WX1- with LED |
| – |
Disconnect electrical connectors. |
|
|
|
| – |
Press fasteners in direction of arrow
-A- and remove front interior light -WX1-. |
| – |
Disconnect electrical connectors. |
| Install in the reverse order of removal, observing the
following: |
| – |
Insert front interior light -WX1- into roof aperture. |
| – |
Insert lens into front interior light -WX1-. |
|
|
|
Questions & answers
Removing and installing front interior light/reading light — Volkswagen Golf Mk7
How do I remove the Golf Mk7 front reading light unit?
Lever out of the headliner, disconnect all connectors (light, sunroof button if fitted) and remove as a unit.
Removing
–
Remove front interior light -WX1-
→ Chapter.
–&n ...
Removing
Caution
Danger of damage to component surfaces.
When using levera ...
Removing and installing sunroof button -E325-
Removing and installing rear interior light/reading light