| Inspect trims for damage prior to installing them. |
| |
Always renew damaged pillar trims; never repair. |
| |
Ensure proper seating of trims when installing them. |
| |
When performing repair work behind the curtain airbag,
always remove the entire module. |
| |
To prevent any potential damage during removal and
installation, curtain airbags must be handled with extreme
caution. |
| |
Place removed curtain airbag modules in packaging or on a
clean, flat surface on a cover. |
| |
After body repairs in vicinity of curtain airbag, check body
for weld spray droplets, deformations and areas of chafing
(compare with opposite side if necessary). |
| |
Until the gas generator is screwed in place, you must always
hold it firmly by hand when handling (transportation, removal
and installation etc.). |
| |
Never twist, kink, throw, shake, pull, hang, squeeze, press,
pinch or clamp any curtain airbag modules. |
| |
Folding is acceptable as long as no damage is caused (in
particular to the protective sleeve). |
|
|
|
Questions & answers
Additional safety instructions for curtain airbag — Volkswagen Golf Mk7
What rules apply when working near Golf Mk7 curtain airbags?
Inspect pillar trims for damage before reinstalling — damaged trims must be renewed, never repaired. Ensure trims are properly seated to allow correct deployment.
Under no circumstances may seat covers be fitted which have
not been specifically approved for use on Volkswagen seats with
side airbags.
...
The side airbag crash sensors respond to changes in pressure
and must therefore be treated with particular caution. Observe
the following:
&nbs ...
Additional safety regulations for side airbag
Safety regulations for crash sensors (pressure sensors) for front side
airbags