Using torque wrench -V.A.G 1331-, this page gives the full removal procedure for the Volkswagen Golf Mk7 bonnet: removing the washer spray jets, pulling the washer line free, and loosening the hinge nuts on both sides before lifting the panel clear.
| Special tools and workshop equipment
required |
|
|
|
|
|
|
Torque wrench -V.A.G 1331- |
| – |
Remove spray jets -4-
→ Electrical system; Rep. gr.92. |
| – |
Pull line -5- out of opening in bonnet
-1-. |
| – |
If fitted, remove caps -3-. |
| – |
Loosen hexagon nuts -2- on left and
right hinge -6- (do not remove). |
| Further dismantling requires the assistance of a second mechanic. |
| – |
Now, unscrew and remove hexagon nuts -2-
and lift bonnet -1- out of hinges
-6-. |
| Installation of bonnet -1- is carried
out accordingly in reverse order of removal. |
Note
| Install the line -5- in a curve. If
line is installed twisted it will kink. |
| – |
Adjusting bonnet -1-
→ Chapter. |
| |
Hexagon nuts
→ Chapter „Assembly overview - bonnet“ |
Questions & answers
Removing and installing bonnet — Volkswagen Golf Mk7
How is the Golf Mk7 bonnet removed?
Remove the washer jets, disconnect the washer hose, detach any electrical connectors, mark the hinge position, unbolt the hinges and lift the bonnet off with an assistant.
Do I need to mark the Golf Mk7 bonnet hinge position before removal?
Yes. Marking the hinge bolts' position before removal ensures the bonnet can be refitted in alignment without full readjustment.
Can I remove the Golf Mk7 bonnet alone?
The manual implies two people are needed — the bonnet is heavy and unwieldy. One person holds it while the other removes the hinge bolts.
1 -
Release lever
Removing and installing
→ Chapter
2 -
Bolt
Qty. 2
1.5 Nm
3 -
Mo ...
Adjusting bonnet
Special tools and workshop equipment
required
...
