Using removal wedge -3409-, this page covers removing the interior monitoring deactivation button -E616- — the switch that turns off the anti-theft interior sensor.
| Special tools and workshop equipment
required |
|
|
|
| – |
Apply removal wedge -VAS 3409- or screwdriver at lower edge
of button for deactivating interior monitoring and vehicle
inclination sensor -E616- and lever it out. |
| – |
Remove button from B-pillar trim. |
|
|
|
| – |
Disconnect connector -arrow-. |
| Installation is carried out in the reverse sequence. |
|
|
|
| Removing and installing door contact
switch -F2-/-F3- |
 Note
| The door contact switch is installed in the door lock and
cannot be renewed separately in the event of malfunction. |
| – |
Removing and installing front door lock
→ General body repairs, exterior; Rep. gr.57. |
|
|
|
Questions & answers
Removing and installing button for deactivating interior monitoring and vehicle inclination sensor -E616- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 monitoring deactivation button -E616-?
Unclip from the centre console, disconnect and remove.
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way (mirror image ...
Caution
