Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing front footwell illumination bulb -L151-/-L152-

Note: if an LED front footwell light is faulty, the entire light must be renewed. This page covers the incandescent bulb variant -L151-/-L152- — remove the footwell light first.

Note If an LED front footwell light is faulty, the entire light must be renewed. Removing –  Remove front footwell light -K268-/-K269- → Chapter.

–  If necessary, lever off heat shield -2- on both sides at arrows -A-. –  Remove heat shield -2- from footwell light -1-.

–  Pull bulb -1- out of bulb holder -2- on reverse side of glove compartment light. Installing Installation is carried out in the reverse sequence. –  Test functionality.

Questions & answers

Removing and installing front footwell illumination bulb -L151-/-L152- — Volkswagen Golf Mk7

How do I change the Golf Mk7 footwell light bulb?

Pull the bulb from the holder and push the new one in. LED versions require full unit replacement.

Removing and installing front footwell light -K269-, front passenger side

Removing     –  Using a flat screwdriver, press in locking lug -1- at point indicated by arrow - ...

Removing and installing central locking SAFELOCK function warning lamp -K133

Removing –  Remove front door trim panel → General body repairs, interior; Rep. gr.70.     ...

Other materials:

• Removing and installing bulb for rear interior light -W43- with incandescent bulbs
• Removing and installing selector lever position display -Y26-
• Removing and installing illuminated vanity mirror -W20-/-W14-
• Removing and installing light for front interior light -W1- with LED
• Overview of fitting locations – lights in roof trim