| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1331- |
| – |
Remove wiper arm
→ Chapter. |
| – |
Remove lower rear lid trim
→ General body repairs, interior; Rep. gr.70. |
|
|
|
| – |
Disconnect electrical connector -1-. |
| – |
Unscrew nuts -2-,
-3- and -5-. |
| – |
Remove rear window wiper motor -V12--4-. |
| Install in the reverse order of removal, observing the
following: |
| – |
Moisten inner side of seal in rear window with, for example,
a rubber and plastic-compatible lubricant (e.g. polyethylene
glycol) if necessary. |
|
|
|
| – |
Check seal is seated correctly in opening of rear window.
Mark -1- on seal must align with
mark -2- on rear window. |
| → Chapter „Assembly overview - rear window wiper system“ |
| – |
Adjusting wiper arm
→ Chapter. |
|
|
|
Questions & answers
Removing and installing rear window wiper motor -V12- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 rear wiper motor -V12-?
Remove the tailgate interior trim. Disconnect the connector, unbolt the motor and remove from inside the tailgate.
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
–&nbs ...
