VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Safety precautions when working on vehicles with Start/Stop system

WARNING: all bolts and nuts must be fully tightened to specification before driving on public roads — this page also covers the accident risk from automatic engine starting on Start/Stop-equipped Volkswagen Golf Mk7 models.

  WARNING
All bolts and nuts must be fully tightened according to specifications before the vehicle is driven on public roads.
  WARNING
There is a risk of an accident through an automatic engine start on vehicles with Start/Stop system.
On vehicles with an active Start/Stop system the engine may start automatically.
Therefore it is essential to ensure that the Start/Stop system has been deactivated when working on the vehicle (switch off ignition, then switch on again as required).
   

    Questions & answers

    Safety precautions when working on vehicles with Start/Stop system — Volkswagen Golf Mk7

    Why must Start/Stop be disabled during Golf Mk7 suspension work?
    The engine can restart automatically, moving components or dropping the car if the subframe is loosened. Disable via diagnostics or battery disconnection.
    Notes on safety
    ...

    Safety precautions when working on subframe
    It is not permitted to carry out welding and straightening operations on load-bearing or wheel-guiding suspension components. Always rene ...

    Other materials: