Using multipoint adapter -3400- and torque wrench -V.A.G 1332-, this page covers removing the Bosch freewheel belt pulley on the Volkswagen Golf Mk7 — clamp the removed alternator in a vice first.
| Special tools and workshop equipment
required |
|
|
|
| Multipoint adapter -3400- |
|
|
|
| Torque wrench -V.A.G 1332- |
| – |
Remove alternator -C-
→ Chapter. |
| – |
Clamp alternator -C- in a vice at mounting points. |
| – |
Lever off poly V-belt pulley cap. |
|
|
|
| – |
Insert adapter -3400- into poly V-belt pulley using 17 mm
ring spanner. |
| – |
Insert M10 multipoint bit -1-
into alternator shaft. |
| – |
Counterhold alternator shaft whilst releasing poly V-belt
pulley by turning it anti-clockwise with ring spanner. |
| – |
Hold poly V-belt pulley stationary by hand. |
| – |
Turn alternator shaft until poly V-belt pulley can be
removed. |
| Install in the reverse order of removal, observing the
following: |
| – |
Screw poly V-belt pulley by hand onto alternator shaft as
far as stop. |
| To install poly V-belt pulley, the torque wrench -V.A.G
1332- needs to be set up as follows: |
|
|
|
| – |
Release socket drive -1- and
pull off grip -2-. |
| – |
Turn grip -2- 180° and reinsert
socket -1-. |
| – |
Set turning direction of torque wrench -V.A.G 1332- to
anti-clockwise at socket drive. |
|
|
|
| – |
Insert M10 multipoint bit -1-
into alternator shaft. |
| – |
Counterhold adapter -3400- using 17 mm ring spanner. |
| – |
Tighten poly V-belt pulley by turning alternator shaft
anti-clockwise using torque wrench -V.A.G 1332-. |
|
|
|
| Component |
Specified torque |
| Securing nut for poly V-belt
pulley |
80 Nm |
Questions & answers
Removing and installing poly V-belt pulley with freewheel, manufacturer: Bosch — Volkswagen Golf Mk7
How do I remove the Golf Mk7 Bosch freewheel alternator pulley?
Use the Bosch-specific freewheel removal tool. Turn anti-clockwise — the freewheel ratchets if turned the wrong way.
Special tools and workshop equipment
required
Socket -3310-
...
Special tools and workshop equipment
required
Multipoint adapter -3400-
...
Removing and installing poly V-belt pulley without freewheel
Removing and installing poly V-belt pulley with freewheel, manufacturer:
Valeo