VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing windscreen washer fluid level sender, »R«

Using a drip tray, this page covers removing the washer fluid level sender -G33- on "R" models — the same individual-or-combined renewal option applies.

Special tools and workshop equipment required
Drip tray
  Note
Dependent on the equipment level, the windscreen washer fluid level sender -G33- may either be renewed individually or together with the washer fluid reservoir.
Removing
–  Remove front right wheel → Running gear, axles, steering; Rep. gr.44.
–  Remove front part of front right wheel housing liner → General body repairs, exterior; Rep. gr.66.
–  Place drip tray under washer fluid reservoir.
   
–  Disconnect electrical connector -1-.
–  Pull windscreen washer fluid level sender -G33--2- out of washer fluid reservoir.
–  If necessary, remove seal -3- from washer fluid reservoir.
Installing
Install in the reverse order of removal, observing the following:
–  Ensure that seal is fitted correctly to opening in washer fluid reservoir.
–  Coat seal with washer fluid so that windscreen washer fluid level sender -G33- can be inserted more easily.
 

Removing and installing windscreen washer fluid level sender, »R«

    Questions & answers

    Removing and installing windscreen washer fluid level sender, »R« — Volkswagen Golf Mk7

    How does Golf Mk7 R washer level sender removal differ?
    Same pull-out method. Different connector routing due to the R reservoir position.
    Removing and installing windscreen washer fluid level sender
    Special tools and workshop equipment required Drip tray   Note Dependent on the equipment level, the windsc ...

    Removing and installing windscreen washer pump
    Special tools and workshop equipment required Drip tray Removing –  Remove front lef ...

    Other materials: