VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Owners Manual: Coolant specification

The Volkswagen Golf Mk7 cooling system is factory-filled with water and at least 40% coolant additive G 13 (TL-VW 774 J), dyed purple for identification. This page explains why that specific mixture matters — it sets both the freezing and boiling points the system is designed around.

First read and observe the introductory information and safety warnings

The cooling system is filled at the factory with a mixture of specially prepared water and at least 40% coolant additive G 13 (TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant additive gives the necessary frost protection down to -25°C (-13°F) and protects the alloy parts of the cooling system against corrosion. The mixture also prevents scaling and raises the boiling point of the coolant.

In order to protect the coolant system, the proportion of coolant additive must always be at least 40%, even if anti-freeze is not required in warm weather and warm climates.

If greater frost protection is required in very cold climates, the proportion of anti-freeze additive can be increased. However, the percentage of coolant additive should not exceed 60%, as this would reduce the frost protection and the cooling effect.

When topping up the coolant, a mixture of distilled water and at least 40% coolant additive - G 13 - or - G 12 plus-plus - (TL-VW 774 G) (both of which are dyed purple) must be used in order to obtain the optimum corrosion protection  . Mixing - G 13 - with the coolant additives - G 12 plus - (TL-VW 774 F), - G 12 - (dyed red) or - G 11 - (dyed blue-green) will significantly decrease the level of corrosion protection and should therefore be avoided  .

WARNING

Insufficient anti-freeze in the coolant system can cause the engine to break down and cause serious injuries.
  • Please note that the amount of correct coolant additive used must be sufficient for the lowest ambient temperature that you expect the vehicle to be exposed to.
  • Coolant can freeze at extremely cold outside temperatures, causing the vehicle to break down. Vehicle occupants with inadequate winter clothing could then freeze to death as the heating will also no longer function.

NOTICE

Never mix genuine coolant additives with other coolants that have not been approved by Volkswagen. Mixing other coolants could cause serious damage to the engine and cooling system.
  • If the liquid in the coolant expansion tank is, for example, brown instead of purple, - G 13 - has been mixed with an unsuitable coolant additive. The coolant must be changed as soon as possible if this is the case. Failure to observe this point can result in serious faults or engine damage.

Coolant and coolant additives can pollute the environment. Spilt operating fluids must be collected and disposed of properly and with respect for the environment.

    Questions & answers

    Coolant specification — Volkswagen Golf Mk7

    What coolant additive does the Golf Mk7 require?
    G 13 (TL-VW 774 J), purple in colour. The system is factory-filled with at least 40% concentration. In cold climates the concentration can be increased to up to 60%.
    Can I use universal coolant in the Golf Mk7?
    No. Only VW-approved G 13 or its compatible predecessors (G 12 plus-plus) should be used. Universal coolants may not be compatible and can cause corrosion.
    What happens if the Golf Mk7 coolant concentration is too low?
    The freezing point rises, the boiling point drops, and corrosion protection is reduced. In winter the coolant can freeze and crack the engine block.
    Warning lamp and coolant temperature display
    Fig. 194 Coolant temperature display in instrument cluster: Ⓐ cold; Ⓑ normal; Ⓒ warning First read and observe the introductory information and safety warnings In normal driving conditio ...

    Checking the coolant level and refilling coolant
    Fig. 195 In the engine compartment: mark on the coolant expansion tank Fig. 196 In the engine compartment: coolant expansion tank cap First read and observe the introductory information and ...