Caution
| When shrink-fitting, take care not to damage any
other wiring, plastic parts or insulating material with
the hot air blower. |
| Observe the operating instructions of the hot air
blower without fail! |
|
| The hot air blower, 220 V / 50 Hz -VAS 1978/14- is used in
conjunction with shrink element for hot air blower -VAS 1978/15-
to shrink fit the crimp connectors. After crimping, the crimp
connector has to be shrink fitted using the hot air blower in
order to prevent any ingress of moisture. |
| Hot air blower, 220 V/50 Hz -VAS 1978/14- is included in
wiring harness repair set -VAS 1978 B- and previous versions. |
| Shrink fitting crimp connectors using hot air blower, 220 V
/ 50 Hz -VAS 1978/14-
→ Chapter, or
→ Chapter. |
|
|
 |
Questions & answers
Hot air blower, 220 V / 50 Hz -VAS 1978/14- — Volkswagen Golf Mk7
What is hot air blower -VAS 1978/14- used for?
Shrinking heat-shrink tubing over soldered or crimped repair joints to insulate and seal them.
Wire strippers -VAS 1978/3- serve as a means of stripping
insulation off wires and cutting wires in the correct manner.
Wire strippers -VAS 1978/3- a ...
Crimping pliers -VAS 1978/1A- or crimping pliers (base tool)
-VAS 1978/1-2- together with head adapter 0.35 - 2.5 mmІ -VAS
1978/1-1- or head adapter 4 ...
