VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing front senders

This page covers removing Volkswagen Golf Mk7 front Park Assist senders — remove the wheel housing liner first, then press both locking lugs while pushing the sender in to its stop.

Removing
–  Remove wheel housing liner → General body repairs, exterior; Rep. gr.66.
   
–  Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop.
–  Disconnect electrical connector -2-.
Installing
Install in the reverse order of removal, observing the following:
  Note
When inserting the sender in the sender retainer, make sure that the isolation ring (black silicone ring) is seated correctly on the sender head.
Both locking lugs of sender retainer must audibly engage when installing the sender.
 

Removing and installing front senders

    Questions & answers

    Removing and installing front senders — Volkswagen Golf Mk7

    How do I remove Golf Mk7 Park Assist front senders?
    Same push-in method as ParkPilot. The Park Assist senders are in the same bumper — they are additional to the ParkPilot four.
    Assembly overview - park assist steering, RHD vehicles
    1 -  Rear park assist steering senders Rear left park assist steering sender -G716- Rear right park assist steering sender -G717- ...

    Removing and installing rear senders
    Removing –  Remove rear wheel housing liner → General body repairs, exterior; Rep. gr.66.   &nb ...

    Other materials: