This page covers removing the anti-theft sensor -G578- (2-bolt version) — remove the front interior light -WX1- first, then the roof module in the indicated direction.
| – |
Remove front interior light -WX1-
→ Chapter. |
| – |
Remove roof module -1- in
direction of arrow -A-. |
| – |
Disconnect electrical connector. |
|
|
|
| – |
Release retaining tabs in direction of arrows
-A- and -B-. |
| – |
Remove anti-theft alarm sensor -G578--1-
from roof module. |
|
|
|
| – |
Release retaining tabs in direction of arrows
-A- and -B-. |
| – |
Remove single sensor -1- from
roof module. |
| Install in the reverse order of removal, observing the
following: |
 Note
| The anti-theft alarm sensor -G578- needs to be parameterised
after renewal. |
| – |
Parameterise anti-theft alarm system sensor -G578-
→ Vehicle diagnostic tester. |
| → Chapter „Assembly overview - interior monitor“ |
|
|
|
Questions & answers
Removing and installing anti-theft alarm sensor -G578-, version with 2 bolts — Volkswagen Golf Mk7
How do I remove the Golf Mk7 alarm sensor -G578- (2-bolt)?
Remove the interior light housing. Unbolt the sensor from the headliner bracket and disconnect.
Removing
–
Remove plenum chamber cover
→ General body repairs, exterior; Rep. gr.50.
...
Special tools and workshop equipment
required
Removal wedge -3409-
Removing
...
