This page covers removing the immobiliser reader coil -D2- on Keyless-Access-equipped Volkswagen Golf Mk7 models — move the steering wheel to its rearmost, lowest position first.
| – |
Move steering wheel to rearmost and lowest position. Use the
entire range of adjustment of the steering column for this
purpose. |
| – |
Remove lower steering column trim
→ General body repairs, interior; Rep. gr.68. |
|
|
|
| – |
Pull reader coil -2- out of
mounting -1- in direction of arrow
-A-. |
| Install in the reverse order of removal, observing the
following: |
| – |
Press reader coil into mounting until it engages audibly. |
|
|
|
Questions & answers
Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system — Volkswagen Golf Mk7
How do I remove the Golf Mk7 immobiliser reader coil -D2-?
Remove the column trims. The coil surrounds the ignition lock barrel or starter button area. Unclip and disconnect.
Note
The turn signal switch -E2-, cruise control system switch
-E45- and intermittent wiper switch -E22- are combined to form
the steering column ...
Special tools and workshop equipment
required
Socket -T10424-
Removing
–
Remove ste ...
