| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1783- |
 Note
| Aerial wirings are directly plugged at the base of roof
aerial -RX5-. |
| – |
Switch off ignition and all electrical consumers, and remove
ignition key. |
| – |
Remove moulded headliner and place it on head restraints
→ General body repairs, interior; Rep. gr.70. |
|
|
|
| – |
Release and unplug connectors -1-
to aerial wires. |
| – |
Remove bolt -3- and remove with
retaining clip. |
| – |
Remove roof aerial -RX5--2-. |
| Install in the reverse order of removal. When doing this,
note the following: |
| – |
Position and press on roof aerial -RX5- until it engages. |
|
|
|
| Component |
Specified torque |
| Bolt -3-
on roof aerial -RX5- |
6 Nm |
Questions & answers
Removing and installing roof aerial -RX5- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 roof aerial -RX5-?
Remove the headliner in the aerial area. Disconnect the cables, unbolt from inside and remove the fin from outside.
Note
Removal and installation of the frequency modulation (FM)
frequency filter in negative wiring -R178- are described for the
right side. Removal and ...
Layout - radio, Composition Touch and
Composition Colour radio version
The radio -R- is installed in the middle of the dash panel.
...
Removing and installing frequency modulation (FM) frequency filter
-R178-/-R179-
Radio