Caution
| Danger of damage to component surfaces. |
| When using leverage tools, mask visible areas of the
component with commercially available adhesive tape. |
|
 Note
| Removal and installation of all entry lights are performed
in the same manner and are described only for one light. |
| The entry lights can be tested by means of the final control
diagnostic function of the respective door control unit. |
| Front left entry light -W31- |
| Front right entry light -W32- |
| Rear left entry light -W33- |
| Rear right entry light -W34- |
| Renewing entry light bulb:
→ Anchor |
| Special tools and workshop equipment
required |
|
|
|
| – |
Switch off ignition and all electrical consumers. |
|
|
|
| – |
Use removal wedge -3409- or a screwdriver to carefully lever
out light. |
| – |
Release and detach connector and remove light. |
| Installation is carried out in reverse order of removal. |
| Replacing entry light bulb |
| – |
Remove front entry light
→ Anchor. |
|
|
|
| – |
Carefully lever off lens from housing. |
|
|
|
| – |
Pull bulb -1- straight upwards
out of holder. |
| Installation is carried out in reverse order of removal. |
|
|
|
| Removing and installing door warning lamp
-W30-/-W36- |
Note
| The door warning lamp and the entry light are combined to
form one component. Therefore, they can only be removed and
installed together as an entire unit. |
| – |
Removing and installing door warning lamp
→ Chapter. |
|
|
|
Questions & answers
Removing and installing front entry light -W31-/-W32- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 front door entry light?
Lever the light out of the door trim, disconnect and remove.
Removing
–
Remove front door trim panel
→ General body repairs, interior; Rep. gr.70.
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way (mirror image ...
Removing and installing central locking SAFELOCK function warning lamp -K133
Removing and installing door opener illumination bulb -L108-/-L109-