Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing tyre pressure sensor, Beru tyre pressure monitoring system

WARNING: after tyre sealant has been used, the pressure sensor on that wheel must be renewed. This page covers the Beru tyre pressure monitoring system on the Volkswagen Golf Mk7.

View of Beru system   WARNING After tyre sealant has been used, the tyre pressure sensor of the respective wheel must be renewed.   WARNING If the tyre pressure sensor is damaged, it must be renewed.

–  Press tyre pressure sensor -1- into well base. –  Bolt on from behind using a micro-encapsulated bolt → Item.   Note Renew the micro-encapsulated bolt. Tighten micro-encapsulated bolt to 4 Nm on all models. Special tools and workshop equipment required

Torque wrench -V.A.G 1410- and insert tool-V.A.G 1410/1-. Specified torques → Anchor

Questions & answers

Removing and installing tyre pressure sensor, Beru tyre pressure monitoring system — Volkswagen Golf Mk7

How do I remove a Golf Mk7 Beru TPMS sensor?

Beru sensors use a specific clamp design. Remove the tyre, release the Beru clamp and lift the sensor off. Follow the Beru-specific fitting guide.

Removing and installing tyre pressure sensor, metal valve body

Special tools and workshop equipment required     Torque wrench -V.A.G 1410- and 11 mm insert ...

Removing and installing tyre pressure sensor, Siemens tyre pressure monitoring system

  WARNING After tyre sealant has been used, the tyre pressure sensor of the respective wheel must be renewed. ...

Other materials:

• Removing and installing tyre pressure sensor, tyre pressure sensor without valve, production version
• Removing and installing tyre pressure sensor, tyre pressure sensor with valve
• Removing and installing tyre pressure sensor, metal valve body
• Removing and installing tyre pressure sensor, Siemens tyre pressure monitoring system
• Removing and installing tyre pressure sensor, tyre pressure sensor without valve, customer service version