 Note
| If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using the prescribed tool
→ Chapter. |
|
|
|
| – |
Insert the release tool appropriate for the contact housing
in the release port of the contact housing. |
| – |
Grab hold of the contact by the wire and push it lightly
into the contact housing -arrow-. |
Note
| By pushing the contact in the direction of the contact
housing, the locking tabs of the contact are lifted up by the
housing edge and disengaged using the release tool. |
| – |
At the same time, push the release tool in the direction of
the contact housing -arrow- and
pull out the released contact from the contact housing. |
|
|
|
| – |
The release tool can be pulled out of the contact housing
again once the contact has been removed. |
|
|
|
Questions & answers
Round connector systems — Volkswagen Golf Mk7
What round connector systems does the Golf Mk7 use?
Bayonet-lock and push-lock round connectors for sensors, actuators and lighting. Each has a specific release tool.
The primary locking mechanism is what fixes an individual
crimp contact in the contact housing.
If necessary, any housing catches in place (secondary ...
Note
If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using the ...
