| The brake pedal travel must not be restricted by additional
floor coverings. |
 Note
| Do not lubricate or grease the pivot pin. The pivot pin must
remain dry. |
|
|
|
| 1 - |
Self-locking hexagon nut |
| To remove, remove mounting bracket first |
| Removal: turn pivot pin clockwise until pivot pin tabs break off |
| Do not lubricate or grease the pivot pin. The pivot pin must remain
dry. |
| Installation: Turn pivot pin anti-clockwise until tabs engage
audibly on stop. |
| 3 - |
Pedal cluster with mounting bracket |
| Removing and installing
→ Chapter |
| Cannot be renewed individually; ensure correct installation position |
| Separating brake pedal from brake servo
→ Chapter |
| Connecting brake pedal to brake servo
→ Chapter |
| Removing and installing
→ Chapter |
| Cannot be renewed individually; ensure correct installation position |
| For ball head of brake servo plunger rod. |
| Insert into both holes in mounting bracket. |
Questions & answers
Assembly overview - brake pedal, LHD vehicles — Volkswagen Golf Mk7
What does the Golf Mk7 GTE LHD brake pedal assembly show?
Same as standard — pedal, spring, pushrod, bracket, brake light switch.
The brake pedal travel must not be restricted by additional floor
coverings.
Note
Do not lubricate or grease the pivot pin. The pivot pin must remain
dry.
...
