| Thoroughly clean all connections and adjacent areas before
disconnecting. |
| Place parts that have been removed on a clean surface and
cover. Do not use fluffy cloths! |
| Carefully cover or seal opened components if the repair
cannot be carried out immediately. |
| Install clean parts only; remove replacement parts from
their packages only immediately before installing them. Do not
use any parts which have not been stored in their packaging
(e.g. in a tool box). |
| If the fuel system is open: |
| – |
Do not work with compressed air. |
| – |
Do not move the vehicle. |
| – |
Do not start the engine. |
| – |
Switch on auxiliary heater. |
|
Questions & answers
Rules for cleanliness for working on the auxiliary heater and the fuel system — Volkswagen Golf Mk7
What cleanliness rules apply to Golf Mk7 auxiliary heater work?
Clean all connections before disconnecting. Place removed parts on clean surfaces. Cap all openings immediately to prevent contamination.
Observe the safety precautions for vehicles with a
Start/Stop system
→ Chapter.
The following abort conditions deactivate the
...
There are different types of identification plates.
When the auxiliary heater is replaced, check the type plate
and the duplicate plate and replace a ...
