| If necessary, eliminate flat spots caused by storage or
handling
→ Chapter. |
| – |
Press tyre off wheel rim
→ Chapter. |
| – |
Rotate tyre by 180° relative to wheel rim. |
| – |
Attach the wheel (together with tyre) to the wheel balancing
machine. |
| – |
Check radial and lateral run-out of wheel/tyre
→ Chapter. |
| – |
If radial and lateral run-out are within specifications,
balance the wheel to 0 g
→ Anchor. |
| – |
If radial and lateral run out are are not within
specifications, match wheel rim and tyre again, and turn tyre by
90° on wheel rim. |
| – |
Check radial and lateral run-out of wheel/tyre again
→ Chapter. |
| – |
If radial and lateral run out are within specifications,
balance the wheel to 0 g
→ Anchor. |
| – |
If radial and lateral run out are are not within
specifications, match wheel rim and tyre again, and turn tyre by
180° on wheel rim. |
| – |
Check radial and lateral run-out of wheel/tyre again
→ Chapter. |
| – |
If radial and lateral run out are within specifications,
balance the wheel to 0 g
→ Anchor. |
| – |
If radial and lateral run out are not within specifications,
check radial and lateral run out on wheel rim
→ Chapter. |
| – |
If radial and lateral run out are within specifications,
renew tyre. |
|
Questions & answers
Matching wheel rims and tyres — Volkswagen Golf Mk7
How do I match Golf Mk7 rims and tyres?
Align the tyre's high point (marked with a dot) with the rim's low point (valve hole or marking) to minimise total runout.
Only trained personnel may perform any assembly work on
run-flat tyres and ultra-high-performance tyres.
If fitted, check tyre pressure sensor ...
Mounting tyre, run-flat tyres, ultra-high performance tyres
Balancing wheel