Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing glove compartment light -W6-

This page covers removing the Volkswagen Golf Mk7 glove compartment light -W6- — turn the light switch to "0", then press the locking lug with a flat screwdriver to lever it out.

Removing –  Turn light switch to “0” position.

–  Press in locking lug -1- using a flat screwdriver, and lever out glove compartment light -2-. –  Disconnect electrical connector -3-. Installing Install in the reverse order of removal, observing the following:   Note If an LED glove compartment light -W6- is faulty, the entire light must be renewed. –  Insert glove compartment light into opening and engage it on opposite side. –  Test functionality.

Questions & answers

Removing and installing glove compartment light -W6- — Volkswagen Golf Mk7

How do I remove the Golf Mk7 glove box light -W6-?

Open the glove box, unclip the light housing and disconnect.

Overview of fitting locations – lights in roof trim

1 -  Driver side illuminated vanity mirror -W20- In the case of vanity mirrors with LED lighting, the entire light must be renewed in the event of a faul ...

Renewing bulb for glove compartment light -W6-

  Note If an LED glove compartment light -W6- is faulty, the entire light must be renewed. Removing –  ...

Other materials:

• Removing and installing light for front interior light -W1- with LED
• Overview of fitting locations – lights in front doors
• Removing and installing front footwell illumination bulb -L151-/-L152-
• Overview of fitting locations – lights in rear doors
• Removing and installing front footwell light -K268-, driver side