 Note
| The outer rear parking aid senders can be removed and
installed without the need to remove the rear bumper. |
|
|
|
| – |
Press both locking lugs in direction of arrow
-A- while at the same time pressing
in sender -1- as far as stop. |
| – |
Disconnect electrical connector -2-. |
| – |
Remove rear bumper cover
→ General body repairs, exterior; Rep. gr.63. |
|
|
|
| – |
Press both locking lugs in direction of arrow
-A- while at the same time pressing
in sender -1- as far as stop. |
| – |
Disconnect electrical connector -2-. |
| Install in the reverse order of removal, observing the
following: |
Note
| When inserting the sender in the sender retainer, make sure
that the isolation ring (black silicone ring) is seated
correctly on the sender head. |
| Both locking lugs of sender retainer must audibly engage
when installing the sender. |
|
|
|
Questions & answers
Removing and installing rear parking aid senders — Volkswagen Golf Mk7
How do I remove Golf Mk7 rear parking sensors?
Same push-in method from behind the rear bumper. Note colour/position coding.
Removing
–
Remove radiator grille
→ General body repairs, exterior; Rep. gr.66.
&n ...
Removing and installing front parking aid senders