Volkswagen Golf Mk7 Owners Manual: Changing a blown fuse
Fig. 232 shows a blown flat-blade fuse (A) versus a JCASE® fuse (B), and Fig. 233 shows removing or inserting each type with plastic pliers on the Volkswagen Golf Mk7. This page gives the full preparation and replacement procedure, starting with switching off the ignition, lights and electrical consumers.
Fig. 232 Blown fuse: A: flat blade fuse, B: JCASE® fuse
Fig. 233 Remove or insert fuse with plastic pliers: A. flat blade fuse, B. JCASE® fuse
First read and observe the introductory information
and safety warningsPreparation
- Switch off the ignition, the lights and all electrical consumers.
- Open the appropriate fuse box.
Detecting a blown fuse
- Shine a torch onto the fuse. This will help you to spot the blown fuse more easily.
- A blown flat blade fuse (ATO®, MINI®) can be recognised from the top and side through the transparent housing surrounding the melted metal strips A.
- A blown JCASE® fuse can be recognised from the top through the transparent housing B.
Changing a fuse
In some vehicles, a pair of plastic pliers for removing fuses is located on the inside of the cover of the fuse box in the engine compartment.
- Open the fuse box cover in the engine compartment and remove the plastic pliers.
- Push the plastic pliers suitable to the fuse design A ① or B ① onto the fuse from the side.
- Lift the fuse up and out.
- If the fuse has blown, replace it with a new fuse of the same amp rating (same colour and same markings) and same size .
- Once the new fuse is inserted, clip the plastic pliers into the holder on the inside of the fuse box cover.
- Fit the fuse box cover.
NOTICE
Questions & answers
Changing a blown fuse — Volkswagen Golf Mk7
How do I change a blown fuse on the Golf Mk7?
Switch off the ignition, identify the blown fuse using the table and diagram, pull it out with the plastic pliers, confirm the wire is broken, and push in a new fuse of the same amperage.
What if the Golf Mk7 replacement fuse blows again immediately?
There is a short circuit or fault in the protected circuit. Do not fit a higher-rated fuse — have the electrical system checked by a workshop.
Where can I get replacement fuses for the Golf Mk7?
Spare fuses of various amperages are usually stored in the fuse box cover. Additional fuses are available from any auto parts shop or Volkswagen dealer.
Should I switch off the Golf Mk7 ignition before changing a fuse?
Yes. Always switch off the ignition and all electrical consumers before removing or fitting a fuse to prevent short circuits.
