| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1410- |
| Carry out the following work: |
| – |
Remove tyre pressure sensor
→ Chapter. |
|
|
|
| – |
Remove nut -1- from metal
valve. |
| – |
Counterhold on metal valve (for example using 2 mm twist
drill) -arrow-. |
Caution
| Tighten nut for metal valve to specified torque.
Retightening is impermissible, as the seal may otherwise
be damaged. |
|
|
|
|
| – |
Tighten nut -1- of metal valve. |
| – |
Counterhold on metal valve (for example using 2 mm twist
drill) -arrow-. |
| – |
Install tyre pressure sensor
→ Chapter. |
| → Chapter „Assembly overview - tyre pressure sensor, tyre
pressure sensor without valve“ |
|
|
|
Questions & answers
Removing and installing valve, metal valve — Volkswagen Golf Mk7
How do I replace a Golf Mk7 metal tyre valve?
Unscrew the nut from inside the rim, remove the old valve, fit the new one with a new seal ring and tighten the nut to the specified torque.
Ensure that the wheel rim is clean.
–
Insert new tyre valve with -VAS 6459--1-.
...
