| Loosen and tighten securing bolts and securing nut for
covers and housings diagonally. |
| Specified torques settings are specified for unoiled bolts
and nuts. |
| Threads of bolts secured with locking fluid must be cleaned
with a wire brush. Then insert bolts with locking fluid -AMV 185 101 A1-. |
| Threaded holes into which self-locking bolts or bolts coated
with locking fluid are screwed, must be cleaned (e.g. with a
thread chaser). Otherwise there is a danger of bolts shearing
when subsequently being removed. |
| Always renew self-locking bolts and nuts. |
|
|
|
Questions & answers
Nuts and bolts — Volkswagen Golf Mk7
What bolt torque rules apply to the Golf Mk7 DSG?
Loosen and tighten cover bolts diagonally. Torque values must be followed exactly — overtorque damages housings, undertorque causes leaks.
After removing gaskets and seals, always inspect contact
surface of housing or shaft for burrs resulting from removal or
for other signs of damage.
...
Allocation gearbox - engine
Golf 2013 ►, Golf Estate 2014 ►
Always take account of the gearbox code if ...
