Using brake filling/bleeding equipment -VAS 5234-, this page covers standard bleeding of the hybrid Volkswagen Golf Mk7 hydraulic system — a pre-pressure of 2 bar is required for the ABS hydraulic unit -N55-.
 Note
| Bleeding the hydraulic system using brake filling and
bleeding equipment -VAS 5234- is described. |
| A pre-pressure of 2 bar is required for bleeding the ABS
hydraulic unit -N55-. |
| Special tools and workshop equipment
required |
|
|
|
| Brake filling and bleeding equipment -VAS 5234- |
|
|
|
| Tool set for brake bleeding -VAS 6564- |
| Carry out the following work: |
| – |
On vehicles with 15-inch rims, remove rear wheels. |
Note
| Adhere strictly to work sequence when bleeding brake system. |
| – |
Connect brake filling and bleeding equipment -VAS 5234-. |
| – |
Open bleeder valves in specified order and bleed brake
calipers. |
| 1 - |
Front left brake caliper |
| 2 - |
Front right brake caliper |
| 3 - |
Rear left wheel brake cylinder |
| 4 - |
Rear right wheel brake cylinder |
| 5 - |
Brake system pressure accumulator -VX70-, LHD vehicles |
| Use suitable bleeder hose. It must sit tightly on bleeder
valve so that no air can enter brake system: |
| – |
Leave bleeder valve of each brake caliper open with bleeder
hose fitted until brake fluid discharges free of air bubbles. |
|
|
|
Questions & answers
Bleeding hydraulic system following standard procedure — Volkswagen Golf Mk7
How do I bleed the Golf Mk7 GTE brake system?
Same pressure-bleeder procedure as standard, but the -VX70- accumulator must be pre-bled first.
General notes on brake fluid
Only use new brake fluid conforming to VW standard
(VW 501 14).
Note
...
Note
Carry out subsequent bleeding when:
brake pedal travel is too long or so-called
»soft brake pedal«
...
