Volkswagen Golf Mk7 Owners Manual: Introduction
Some Volkswagen Golf Mk7 models are delivered without a factory-fitted jack or box spanner — this introduction flags that variation before covering wheel-change preparation, the wheel bolts, jacking and the after-change steps in detail on the pages that follow.
This chapter contains information on the following subjects:
→ Preparation for changing a wheel
→ Wheel bolts→ Lifting the vehicle with the jack
→ Changing a wheel→ After changing a wheel
Some models are delivered without a factory-fitted jack or box spanner. If this is the case, the wheel should be changed by a qualified workshop.
The vehicle jack supplied with the vehicle is only designed for changing a wheel when one vehicle tyre is damaged and has to be replaced. Seek expert assistance if both tyres on one side of the vehicle, both tyres on one axle, or all tyres are damaged.
Only change the wheel yourself when the car is parked in a safe place, you are familiar with the necessary steps and safety procedures and you have access to all the correct tools. Seek expert assistance if this is not the case.
Additional information and warnings:
- Exterior views
- Vehicle key set
- Wheels and tyres
- In an emergency
- Vehicle toolkit
- Hub caps

WARNING
- Stop the vehicle as soon as possible and when safe to do so. Park the vehicle at a safe distance from moving traffic in order to carry out the wheel change.
- All passengers and children in particular must be at a safe distance and away from your area of work during the wheel change.
- Switch on the hazard warning lights to warn other road users.
- The ground should be firm and level. If necessary use a large, strong board or similar support for the vehicle jack.
- Only change the wheel yourself if you feel confident carrying out the procedure. If not, seek expert assistance.
- Always use suitable and undamaged tools to change the wheel.
- Always switch off the engine, switch on the electronic parking brake and move the selector lever to the position P or select a gear on a manual gearbox in order to reduce the risk of unintended vehicle movement.
- The wheel bolt tightening torque should be checked with a torque wrench immediately after changing a wheel.
Questions & answers
Introduction — Volkswagen Golf Mk7


