Using torque wrench -V.A.G 1783-, this page covers removing the Tiptronic switch -E439-/-E438- — described for the left side, with the right following the same procedure.
| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1783- |
 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out
laterally reversed in the same way. |
| – |
Switch off ignition and all electrical consumers, and remove
ignition key. |
| – |
Remove multifunction buttons in steering wheel -E441-/-E440-
→ Chapter. |
|
|
|
| – |
Remove bolt -1- on steering
wheel. |
| – |
Remove switch for Tiptronic -2-
with connector wiring backwards. |
| Install in the reverse order of removal. When doing this,
note the following: |
| → Chapter „Overview - multifunction steering wheel“ |
|
|
|
Questions & answers
Removing and installing Tiptronic switch in steering wheel -E439-/-E438- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 Tiptronic paddle shifters?
Remove the driver airbag. Unbolt or unclip the paddle from behind the steering wheel spoke and disconnect.
Special tools and workshop equipment
required
Removal wedge -3409-, qty. 2
...
