Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing rear senders

This page covers removing Volkswagen Golf Mk7 rear Park Assist senders — remove the rear wheel housing liner first, then press both locking lugs while pushing the sender to its stop.

Removing –  Remove rear wheel housing liner → General body repairs, exterior; Rep. gr.66.

–  Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop. –  Disconnect electrical connector -2-. Installing Install in the reverse order of removal, observing the following:   Note When inserting the sender in the sender retainer, make sure that the isolation ring (black silicone ring) is seated correctly on the sender head. Both locking lugs of sender retainer must audibly engage when installing the sender.

Questions & answers

Removing and installing rear senders — Volkswagen Golf Mk7

How do I remove Golf Mk7 Park Assist rear senders?

Same method. Additional senders in the rear bumper alongside the ParkPilot four.

Removing and installing front senders

Removing –  Remove wheel housing liner → General body repairs, exterior; Rep. gr.66.     ...

Automatic headlight range control

...

Other materials:

• Assembly overview - park assist steering, LHD vehicles
• Removing and installing front senders
• Assembly overview - park assist steering, RHD vehicles
• Additional information
• Assembly overview - Bowden cable