| Special tools and workshop equipment
required |
| – |
Remove steering column switch module
→ Chapter. |
|
|
|
| – |
Disconnect electrical connectors -1-
and -4-. |
 Note
| If it is not possible to remove the shear bolt with the
socket -T10424-, the bolt will need to be drilled out using an
angle drill and a 8.5 mm diameter bit. |
| – |
Unscrew shear bolt -2- using
socket -T10424-. |
| – |
Remove steering lock housing -3-. |
| In order to renew the steering lock housing, the
ignition/starter switch and the lock cylinder must be removed. |
| – |
Removing ignition/starter switch
→ Chapter. |
| – |
Remove lock cylinder
→ Chapter. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
| – |
Tighten new bolts -arrows-
until shear heads break off. |
|
|
|
Questions & answers
Removing and installing steering lock housing — Volkswagen Golf Mk7
How do I remove the Golf Mk7 steering lock housing?
Remove column trims and ignition lock. Unbolt the housing from the column tube. Requires shear bolt drilling on anti-theft versions.
Removing
–
Move steering wheel to rearmost and lowest position. Use the
entire range of adjustment of the steering column for this
...
Removing and installing immobiliser reader coil -D2-, vehicles with keyless
access locking and starting system
Parking aid