Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing light conductor for front sill panel moulding ambient lighting -W67-/-W68

Note: the ambient lighting conductors -W67-/-W68- are integrated into the sill panel mouldings and cannot be renewed individually — this page explains the full-moulding renewal required.

Note The light conductors for front sill panel moulding ambient lighting -W67-/-W68- are integrated into the sill panel mouldings and cannot be renewed individually. If the light conductor for front sill panel moulding ambient lighting -W67-/-W68- is defective, the complete sill panel moulding must be renewed. Removing –  Remove light conductor for front sill panel moulding ambient lighting -W67-/-W68- → General body repairs, interior; Rep. gr.70. Installing Installation is carried out in the reverse sequence.

Questions & answers

Removing and installing light conductor for front sill panel moulding ambient lighting -W67-/-W68 — Volkswagen Golf Mk7

How do I remove the Golf Mk7 sill ambient light conductor?

Remove the sill moulding. Unclip the light conductor and disconnect from the LED source.

Removing and installing light for rear interior light -W43- with LED

  Note The lights used for the rear interior light -W43- are the same as the rear left and rear right reading lights -W11-/ -W12-. ...

Controls

...

Other materials:

• Overview of fitting locations – lights in front doors
• Removing and installing glove compartment light -W6-
• Removing and installing front footwell light -K269-, front passenger side
• Removing and installing luggage compartment light -W3-
• Overview of fitting locations – lights in dash panel