| 1 - |
Right track rod ball joint |
| Removing and installing
→ Chapter |
| Installation position
→ Anchor |
| Allocation
→ Electronic Parts Catalogue “ETKA”. |
| Counterhold on track rod ball joint with a spanner when loosening or
tightening nut. |
| Must not be twisted after toe setting has been adjusted. |
| Removing and installing
→ Chapter |
| Removing and installing
→ Chapter |
| Allocation
→ Electronic Parts Catalogue “ETKA”. |
| Removing and installing
→ Chapter |
| 8 - |
Left track rod ball joint |
| Removing and installing
→ Chapter |
| Installation position
→ Anchor |
| Allocation
→ Electronic Parts Catalogue “ETKA”. |
| Counterhold on track rod ball joint with a spanner when loosening or
tightening nut. |
| Removing and installing
→ Chapter |
| Must not be twisted after toe setting has been adjusted. |
| Secure new hose clip using locking pliers for Phaeton steering rack
-VAS 6199-. |
| If defective, renew together with track rod ball joint |
| Removing and installing
→ Chapter |
Questions & answers
Repairing steering rack — Volkswagen Golf Mk7
Can the Golf Mk7 steering rack be repaired?
Only the boots and track rod ends can be renewed. The internal rack mechanism must not be opened — any internal fault requires full rack replacement.
Special tools and workshop equipment
required
Ball joint puller -T10187-
...
Removing and installing steering angle
sender -G85-
Note
The steering angle sender -G85- is a component of the ...
