 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
| – |
Remove ignition key, if inserted. |
| – |
Turn light switch to “0” position. |
| – |
Remove wheel housing liner
→ General body repairs, exterior; Rep. gr.66. |
|
|
|
| – |
Unscrew bolts -1- and
-3-. |
| – |
Lift fog light -4- in direction
of arrow -A-. |
| – |
Pull fog light -4- out of
bumper cover. |
| – |
Disconnect electrical connector -2-. |
| Install in the reverse order of removal, observing the
following: |
| – |
Adjusting fog lights
→ Booklet36.1 |
| → Chapter „Assembly overview - fog lights, GTI and GTD“ |
|
|
|
Questions & answers
Removing and installing fog light, GTI and GTD — Volkswagen Golf Mk7
How do I remove the Golf Mk7 GTI/GTD fog light?
Same wheel-arch access but different bumper aperture. Twist and pull the unit out, disconnect connector.
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
