WARNING
| After tyre sealant has been used, the tyre pressure
sensor of the respective wheel must be renewed. |
|
| The Siemens system does not have a micro-encapsulated bolt. |
| The tyre pressure sensor is secured in the wheel rim using a
union nut
→ Item. |
| The metal valve body is used as an aerial. |
| The connection between the metal valve body and the tyre
pressure sensor must not be interrupted. |
WARNING
| When pressing the tyre pressure sensor into the well
base of the wheel rim, counterhold the metal valve from
behind with your hand. The connection between the metal
valve and the tyre pressure sensor must not be
interrupted. If the tyre pressure sensor is damaged, it
must be renewed.
|
|
| – |
Press tyre pressure sensor into well base. |
| – |
Secure tyre pressure sensor on metal valve using a union nut
→ Chapter. |
| Specified torques
→ Anchor |
|
|
|
Questions & answers
Removing and installing tyre pressure sensor, Siemens tyre pressure monitoring system — Volkswagen Golf Mk7
How do I remove a Golf Mk7 Siemens TPMS sensor?
Siemens sensors have their own clamp and positioning requirements. Remove tyre, release clamp, remove sensor. Follow Siemens fitting guide on installation.
View of Beru system
WARNING
After tyre sealant has been used, the tyre pressure
sensor of the respe ...
Tyre sealant, use-by date
The tyre sealant in the bottle has a limited shelf-life.
The bottl ...
Removing and installing tyre pressure sensor, Beru tyre pressure monitoring
system
Tyre sealant