| The emergency call module control unit and communication
unit -J949--1- is fitted behind the
dash panel insert. |
|
|
|
| Set emergency call module control unit and communication
unit -J949- to workshop mode → Vehicle
diagnostic tester. |
| – |
Set emergency call module control unit and communication
unit -J949- to workshop mode → Vehicle
diagnostic tester. |
| – |
Remove dash panel insert
→ Electrical system; Rep. gr.90. |
|
|
|
| – |
Separate attachment -3- and
remove bracket together with control unit
-2-. |
| – |
Release and separate connectors on control unit for
emergency call module and communication unit -J949-. |
|
|
|
| – |
Operate locking hooks -2- and
pull control unit for emergency call module and communication
unit -J949- out of bracket -3-. |
| Install in reverse order of removal. |
|
|
|
Questions & answers
Removing and installing emergency call module control unit and communication unit -J949-, eGolf — Volkswagen Golf Mk7
How do I remove the Golf Mk7 e-Golf emergency call module -J949-?
Remove boot trim for access. Disconnect the connector, unbolt and remove. A new unit must be coded and configured for the eSIM.
1 -
Control unit in dash panel insert -J285-
2 -
Telephone microphone -R38-
Installed in front section of roof console
...
