VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Owners Manual: Changing bulbs in the tail light cluster in the tailgate

Fig. 237 shows removing the cover and Fig. 238 the bulb holder in the Volkswagen Golf Mk7 tailgate tail light. The manual stresses following the steps in the specified order — this page gives that exact sequence, starting with the safety checklist.

Fig. 237 In the tailgate: removing the cover

Fig. 238 In the tailgate: removing the bulb holder

First read and observe the introductory information and safety warnings
The actions should only be carried out in the specified order:
1. Observe and follow the instructions on the checklist.
2. Open the tailgate.
3. Carefully prise off the cover in the direction of the arrow using the flat blade of the screwdriver from the vehicle toolkit .
4. Pull out the fuse . Press the catches ③ on the connector and pull out the connector.
5. Release the retaining lugs on the bulb holder in the direction of the arrow and pull out the bulb holder.
6. Replace the defective bulb with a new bulb of the same type.
7. Replace the bulb holder. The retaining lugs must audibly click into place.
8 Attach the connector to the bulb holder and fit the cover. The cover must engage fully and securely.

There are various types of rear light, so the position and design of covers, bulbs and bulb holders may vary from those shown in the illustrations.

In tail lights with LED technology, the reversing light is fitted with a normal bulb. This bulb can be changed.

    Questions & answers

    Changing bulbs in the tail light cluster in the tailgate — Volkswagen Golf Mk7

    How do I change a Golf Mk7 tailgate tail light bulb?
    Open the tailgate, remove the trim cover, turn the bulb holder anti-clockwise, pull it out, replace the bulb and refit in reverse order.
    What bulbs are in the Golf Mk7 tailgate tail lights?
    Typically a reversing light and one section of the tail/brake light. Exact bulb types are listed in the specification table in the manual.
    Do I need tools to change the Golf Mk7 tailgate light bulb?
    A flat screwdriver or trim tool may be needed to remove the cover. The bulb holder twists out by hand.
    Changing bulbs in the front bumper
    Fig. 236 In the front right wheel housing liner: changing a bulb in the headlight First read and observe the introductory information and safety warningsBefore changing the bulb in the left-hand ...

    Changing bulbs in the tail light cluster in the body
    Fig. 239 On the side of the luggage compartment: removing the tail light cluster Fig. 240 Tail light cluster in the body: removing the bulb holder ① to ⑤: release tabs First read and obser ...