 Note
| If necessary, replace attachment parts, cable ties or
marking rings to match the uniform probe to the defective probe
as specified. |
| The wires should not be crimped or cut as otherwise the
function of the Lambda probe will be impaired. |
| – |
Remove the old Lambda probe. |
|
|
|
| – |
Place both Lambda probes next to each other so that the
sensor housings are at the same height. |
|
|
|
| – |
Tie back any excess in the uniform probe length (approx. 50
- 250 mm) to the size of the defective probe and secure with
cable ties -1-. |
| – |
Install the new Lambda probe in the vehicle. |
|
|
|
Questions & answers
Renewing LSU Lambda probe (6-pin) — Volkswagen Golf Mk7
How do I renew the Golf Mk7 LSU (6-pin) lambda probe?
Same procedure as 4-pin but with a 6-pin connector. The wideband probe requires careful handling — do not drop or contaminate the sensing element.
Note
If necessary, replace attachment parts, cable ties or
marking rings to match the uniform probe to the defective probe
as specified.
...
Note
In addition to identifying by way of the part number, the
protective tube can also be used as a means of identification.
Type D1, ...
