Using removal wedge -3409-, this page covers removing the incandescent bulb for rear interior light -W43- — Note: the same bulbs serve the rear reading lights -W11-/-W12-.
| Special tools and workshop equipment
required |
|
|
|
 Note
| The lights used for the rear interior light -W43- are the
same as the rear left and rear right reading lights -W11-/
-W12-. |
|
|
|
| – |
Lever off lens -3- for rear
interior light -W43- using removal wedge -3409-. |
| – |
Pull bulb -1- out of bulb
holder -2- in direction of arrow
-A-. |
| Install in the reverse order of removal, observing the
following: |
Caution
| Risk of damage to the bulb. |
| Do not touch the glass part of the bulb with bare
fingers. Fingers leave traces of grease on the glass
bulb, which vaporise when the bulb is switched on and
cause the glass bulb to cloud over. |
| Wear, for example, clean fabric gloves when
inserting bulbs. |
|
|
|
|
Questions & answers
Removing and installing bulb for rear interior light -W43- with incandescent bulbs — Volkswagen Golf Mk7
How do I change the Golf Mk7 rear interior light bulb?
Same lever-out method as the front light.
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Note
The lights used for the rear interior light -W43- are the
same as the rear left and rear right reading lights -W11-/
-W12-.
...
Removing and installing bulb for front interior light -W1- with incandescent
bulbs
Removing and installing light for rear interior light -W43- with LED