VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing light for front interior light -W1- with LED

Using removal wedge -3409-, this page covers removing the LED front interior light -WX1- — Note: the same light unit also serves the front passenger reading light -W13-.

Special tools and workshop equipment required
   
Removal wedge -3409-
  Note
The light used for the front interior light -WX1- and the light front passenger reading light -W13- is the same component.
If the front interior light -WX1- or front passenger reading light -W13- is defective, the lens must be renewed.
Removing
  Caution
Danger of damage to component surfaces.
When using leverage tools, mask visible areas of the component with commercially available adhesive tape.
 

Removing and installing light for front interior light -W1- with LED

–  Lever off lens of front interior light -W1- at points marked with -arrows- using removal wedge -3409-.
–  Disconnect electrical connectors.
Installing
Installation is carried out in the reverse sequence.
–  Test functionality.
 

Removing and installing light for front interior light -W1- with LED

    Questions & answers

    Removing and installing light for front interior light -W1- with LED — Volkswagen Golf Mk7

    How do I remove the Golf Mk7 front interior LED light -W1-?
    Lever the housing out of the headliner with a flat tool, disconnect and remove.
    Removing and installing illuminated vanity mirror -W20-/-W14-
      Note If an LED vanity mirror light is faulty, the entire light must be renewed. Removal and installation are described for ...

    Removing and installing bulb for front interior light -W1- with incandescent bulbs
    Special tools and workshop equipment required     Removal wedge -3409-   Note ...

    Other materials: