Using torque wrench -V.A.G 1783-, this page covers removing the mirror entry (puddle) light — described for the left side, with the right following the same procedure.
| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1783- |
 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
| If the event of a defective LED, the entry light in exterior
mirror needs to be renewed. |
| – |
Removing and installing mirror trim
→ General body repairs, exterior; Rep. gr.66. |
|
|
|
| – |
Lift driver side entry light in exterior mirror -W52--1-
in direction of arrow -A-. |
| – |
Pull driver side entry light in exterior mirror -W52- in
direction of arrow -B- out of
mirror housing -2-. |
| – |
Press locking mechanism -3- in
direction of arrow -C-. |
| – |
Disconnect electrical connector -2-. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
Questions & answers
Removing and installing entry light in exterior mirror — Volkswagen Golf Mk7
How do I remove the Golf Mk7 mirror entry light?
Lever the lens out of the bottom of the mirror housing, disconnect and remove the LED or bulb unit.
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Note
...
