| The maximum wheel lock is determined with the aid of the
wheel alignment computer. |
| – |
When the values for the maximum wheel lock lie outside the
tolerances, then check following: |
| Are steering or suspension components damaged or deformed? |
| Are track rods visually OK.? |
| Is the symmetry of the track rods OK.? |
| Damaged components must be renewed. |
| – |
If the steering wheel is crooked, check the following: |
| Check steering components for damage and deformation. If
necessary, renew damaged components. |
| Check suspension components for damage and deformation. If
necessary, renew damaged components. |
| Check symmetry of track rods also. |
|
|
|
| – |
Measure dimension -a- of
shorter track rod. Shorten longer track rod to same dimension.
Screw track rod ball joint -1-
deeper onto track rod -2-. |
| Dimension -a- must be the same
on left side and right side track rod ball joints. |
| Maximum permissible difference between left and right
< 2.5 mm. |
| – |
When returning steering to central position, swivel steering
wheel with even movements. |
|
|
|
Questions & answers
Checking maximum wheel lock — Volkswagen Golf Mk7
How do I check Golf Mk7 maximum wheel lock?
Turn the steering from lock to lock and compare the total angle with the specification. Unequal lock indicates steering rack misalignment.
Explanation regarding “PR numbers” on vehicle data sticker
Various types of running gear are installed depending on
engine and equipment level. T ...
