Using brake pressure regulator tester -V.A.G 1310 A- with adapter -V.A.G 1310/6-, this page covers testing the hybrid Volkswagen Golf Mk7 hydraulic brake system for leaks.
| Special tools and workshop equipment
required |
| Tester for brake pressure regulator -V.A.G 1310 A- |
|
|
|
| Adapter M10 -V.A.G 1310/6- |
| Brake system (hydraulic unit, brake hoses, brake lines and
brake calipers) operating properly and free of leaks. |
| Carry out the following work: |
| – |
Remove bleeder valve at one of front brake calipers. |
| – |
Connect pressure gauge -V.A.G 1310 A- and bleed. |
| – |
Apply pressure to brake pedal until gauge indicates a
pressure of 50 bar. The pressure must not drop by more than
4 bar within the test period of 45 seconds. Renew brake master
cylinder if drop in pressure exceeds specification. |
|
|
|
Questions & answers
Testing for leaks — Volkswagen Golf Mk7
How do I test the Golf Mk7 GTE brake system for leaks?
Same pedal-hold test as standard, plus check the -VX70- accumulator fittings for weeping.
Special tools and workshop equipment
required
Sealing plug repair kit -1H0 698 311 A-
& ...
