| The flanging tool for brake lines -VAS 6056- can be used to
flange brake lines with an outer pipe diameter of 5 mm without
damaging the coating. In certain cases, this allows sections of
brake lines to be renewed at less expense. |
| The use of flanging tool V.A.G. 1356 is not permitted due to
the coating and the diameter of the black brake lines. |
 Note
| Brake lines may only be bent to max. 90°, as they otherwise
kink or display deformations which constrict the cross-section
of the line to an impermissible degree. |
| Preferably separate brake lines at underbody. |
| The positions of the intermediate pieces must be selected so
that they cannot chafe on moving parts. |
| Do not grease spindle; merely clean with methylated spirits. |
| Special tools and workshop equipment
required |
|
|
|
| Flanging tool for brake lines -VAS 6056- |
| Brake filling and bleeding equipment -VAS 5234- |
|
|
|
| List of individual tools: |
| 1 - |
Flanging tool -VAS 6056/1- |
| Flanging tool -VAS 6056/1- contains flanging jaws -VAS 6056/6- |
| 2 - |
Pipe cutter -VAS 6056/2- |
| 3 - |
Brake line scraper -VAS 6056/3- |
| Grub screws (in shaft and at side) are adjusted and must not be
readjusted! |
| 4 - |
Grip wrench with plastic jaws -VAS 6056/4- |
| 5 - |
Pipe bending tool -VAS 6056/5- |
| 7 - |
Flanging jaws -VAS 6056/7- |
Questions & answers
Brake lines — Volkswagen Golf Mk7
What GTE brake line topics are covered?
Flanging tool assembly and work instructions — same as standard Golf.
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
1 -
Flanging tool upper part
Unbolt to change flanging jaws
2 -
Fastening for handle
Must be unscrewed to access ...
